Flysky TH9X 8CH 2.4GHz Transmitter and Receiver (TX+RX Set)
Flysky TH9X 8CH 2.4GHz Transmitter and Receiver (TX+RX Set)
Product Code: 1305019006
Availability:Out of stock
$87.98
FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.
Specifications:
- FlySky 2.4G 8CH System
- Channels: 8 Channels
- Model Type: glider, helicopter, airplane, also car or boat
- RF Range: 2.40-2.48GHz
- Bandwidth: 500Hz
- Band: 160
- RF Power: less than 20DB
- 2.4G System: AFHDS
- Modulation: GFSK
- Code Type: PPM/PCM
- Senditivity: 1024
- LCD Type: 128 x 64 dot
- Low Voltage Warning: yes(less than 9V)
- DSC Port: yes(3.5mm:output:PPM)
- Charger Port: yes
- Size: 180 x 220 x 70 mm
- Power: 12VDC or 8 x 1.5AA
- Weight: 670g
- Mode 2 (Left Hand Throttle)
The transmitter can do:
- Throttle curves
- Pitch curves
- Endpoint adjustments
- Subtrim
- Swash AFR mixes
- Servo reversing
- Timer
- Dual rate
- Exponential
- Flaperons
- V-Tail mixing
- Elevons
Flysky FS-R9B 2.4G Receiver:
- Channels: 8channels
- Modulation Type:2.4G
- modulation: GFSK
- Difference Frequency: No
- Frequency: 2.4G
- Power: 5V DC(4 x 1.5V AA)
- weight: 25g
- ANT length: 26mm
- size: 52 x 33 x 15mm
- Certificate: CE,FCC,RoHS
Package Included:
- 1 x FlySky FS-TH9X-B 2.4G 8CH Transmitter Mode 2
- 1 x FS-R9B 8CH 2.4GHz Receiver
- 1 x TM002 2.4GHz Module
- 1 x Bind Plug
- 1 x user manual
How to bind the RX (receiver) to the TX (transmitter):
1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli